SDI Video Inputs
1
HyperDeck Studio is a broadcast HD based solid state deck that includes 3G-SDI and HDMI connections so you can work in all SD and HD formats up to 1080p30. You get familiar VTR style controls so it’s just like using a traditional broadcast deck, along with compressed or uncompressed 10-bit 4:2:2 broadcast quality recording. The low cost makes it easy to install multiple units when you need ISO recorders, or are doing long form logging or mastering for SD and HD.
1
2
270Mb, 1.5G-SDI, 3G-SDI.
1 x HDMI type A connector.
1 x HDMI type A connector.
None.
None.
None, embedded audio only.
None, embedded audio only.
None.
16 channels embedded in SD and HD in QuickTime files. 2 channels in Avid DNxHD MXF files.
16 channels embedded in SD and HD in QuickTime files. 2 channels in Avid DNxHD MXF files.
8 channels embedded in SD and HD in QuickTime files. 2 channels in Avid DNxHD MXF files.
2 channels.
Tri-Sync or Black Burst.
None
Front panel configurable or USB 2.0 high speed interface.
1 x type B USB 2.0 port for initial setup, software updates and HyperDeck Utility software control.
525i59.94 NTSC, 625i50 PAL
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30
1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30
1080i50, 1080i59.94, 1080i60
None.
SMPTE 259M, SMPTE 292M
HD RP188 and closed captioning.
Television standard sample rate of 48kHz and 24-bit.
4:2:2
10-bit
REC 601, REC 709
HDMI input is unable to capture from copy protected HDMI sources. Always confirm copyright ownership before capture or distribution of content.
2 x SSD for SD and HD recording.
SATA-II or SATA-III solid state disc.
Can format discs to ExFAT for Windows and Mac or HFS+ for Mac file systems.
Uncompressed QuickTime, ProRes 422 HQ QuickTime, ProRes 422 QuickTime, ProRes 422 LT QuickTime, ProRes 422 Proxy QuickTime, Avid DNxHD QuickTime, Avid DNxHD MXF up to 1080i60
None.
12 buttons for transport and menu control, 2.2 inch color display.
RS-422 deck control, SDI start/stop, timecode run. Includes Blackmagic HyperDeck SDK and Ethernet HyperDeck Control Protocol.
Media Express, Disk Speed Test, Blackmagic System Preferences and Blackmagic driver (Mac only).
Firmware built into software driver. Loaded at system start, or via updater software.
Built in LCD for video, audio and timecode monitoring and menu settings.
1 rack unit size. Less than 7 inches deep.
1x Internal 100-240V AC.
5° to 40° C (41°vto 104° F)
-20° to 45° C (-4° to 113° F)
0% to 90% non-condensing
HyperDeck Studio
SD card with software and user manual, Blackmagic HyperDeck SDK and Ethernet HyperDeck Control Protocol.