Contact Closure
25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs.
GPI and Tally Interface
Add tally to your ATEM switcher with Blackmagic Design's GPI and Tally Interface! With 8 contact closure tally outputs, you can send a tally signal to your cameras, replay machines and monitors so everyone knows which camera is 'on-air'! If you need more tally outputs, simply connect multiple GPI and Tally Interfaces together because it connects via Ethernet to your ATEM production switcher.
Connections
Computer Interface
1 x USB 2.0 high speed interface for configuration and firmware updates.
Inputs
Optical isolators triggered by connection to ground. Max 5V at 14mA.
Outputs
Mechanical relay contact closure to ground. Max 30V at 1A.
Ethernet
10/100 BaseT with loop through for connecting to other ethernet enabled equipment.
Software
Software Included
Configured via ATEM Switcher Utility.
Internal Software Upgrade
Firmware built into software driver. Loaded at system startup or via updater software.
Operating Systems
Mac 10.14 Mojave,
Mac 10.15 Catalina or later.
Windows 8.1 or Windows 10.
Power Requirements
Power Supply
12V power supply included with international socket adaptors for all countries.
Physical Specifications
Environmental Specifications
Operating Temperature
0° to 40° C (32° to 104° F)
Storage Temperature
-20 - 60 degrees celsius
Relative Humidity
Up to 95%
What's Included
GPI and Tally Interface
Software CD
Power Supply